Jeep JK Wrangler Vehicle Cargo Control

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

Hi Steve; assuming you have the factory plastic or steel bumper you can use the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521453-5. This is going to be compatible with your Roadmaster Sterling Tow Bar #RM-576. You will also need…

Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount of…

Hi James; the BTBRV Tongue Weight Scale #BTBRV44FR uses a 323 gauge so the margin of error is 3%. The gauge on the scale displays weight in 50-lb increments up to 2,000 lbs.

Hey Jordan, thanks for getting in touch and for providing the link to the specs. I really appreciate that. The main spec I am looking at here is the hitch weight which is 754 lbs. Every weight distribution (WD) hitch has a specific tongue weight…

I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed compatible.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Dave, we have a version that does fit your tire size with the part #TC3231CAM but the specific size you mentioned would not work.